FKM Powder

Group FKM
Min. Order 100 kilogram
Terms of Payment L/C, D/A, D/P, T/T
Update Time 2016-06-28

                                              FKM Powder

                                         Polymer Processing Additives (PPA)

FKM powder is one kind of Fluoroelastomer with shape of powder; it could be used as polymer processing additive of engineering plastic like HDPE, LLDPE and PP, in order to improve processing performance.

1.  Characteristic

Main Properties



White granules

Particle size(μm)

600 - 1000

Fluorine content (wt %)


Specific gravity(g/cm3

1.75 - 1.78

Moisture content (≤%)


Tensile strength(mPa)



Processing aid for blow membrane, cast film; sheet and pipe extrusion; wire and cable, jacket extrusion.

Processing guide

It is suggested that firstly make master batch through extruder with Powder FKM content 2%-3%, then mix with polymer for processing at certain ratio.

2.  Package、storage and transportation:

(1). FKM powder is packed in paper drum with 25kg net weight per drum.

(2). It should bestored in clean, dry place with temperature below 30℃.