- CAS No.
- Synthetic Resin and Plastic
PVDF Synthetic Resin and Plastics Injection Grade FTH-211
PVDF Resin FTH-211 is homopolymer, white granular resin, with low melt viscosity, high melting index, good fluidity, good mechanical strength and toughness, suitable for injection molding process.
PVDF Synthetic Resin and Plastics Applications
1.PVDF valve body, valve cover, pipe fitting, lining plate
1.25kg per bag
2.50kg per drum
PVDF Synthetic Resin and Plastics Specification:
|Appearance||white translucent pellets|
|Melt flow rate(MFR g/10min)||10 - 25|
|Tensile strength at break (Mpa)||≥25|
|Elongation at break (%)||≥30|
|Tensile strength at yield (Mpa)||≥45|
|Elongation at yield (%)||≥5|
|Melting point(℃)||165 - 175|