- CAS No.
- Synthetic Resin and Plastic
PVDF Synthetic Resin and Plastics Molding Grade FTH-213
PVDF Resin FTH-211 is homopolymer, white granular resin, with low melt viscosity, high melting index, good fluidity, good mechanical strength and toughness, suitable for injection molding process.
PVDF Synthetic Resin and Plastics Applications
2.Wire and cable
25kg per bag
50kg per drum
PVDF Synthetic Resin and Plastics Specification:
|Appearance||white translucent pellets|
|Melt flow rate(MFR g/10min)||1 - 6|
|Tensile strength at break (Mpa)||≥35|
|Elongation at break (%)||≥30|
|Tensile strength at yield (Mpa)||≥45|
|Elongation at yield (%)||≥5|
|Melting point(℃)||165 - 175|