PTFE Free Flow (Pelletized) Resin
- Model
- FT-4A1/FT-4A2/FT-4A3
Item specifics
- White powder
- No impurities
Review
Description
PTFE Free Flow (Pelletized) Resin
| FT-4A2 | FT-4A3 |
Appearance | White powder, no impurities | |
Tensile strength, Mpa ≥ | 22.5 | 22.5 |
Elongation at break, %≥ | 275 | 275 |
Bulk density, g/L | 750±150 | 750±150 |
Average particle size, µ m | 401-600 | 601-900 |
Water content, % ≤ | 0.02 | 0.02 |
Melting point, °C | 327 ± 5 | 327 ± 5 |
S.S.G | 2.13 ~ 2.19 | 2.13 ~ 2.19 |
Thermal instability index, ≤ | 30 | 30 |
Characters | Can make multi-angle automatic molding products. | The partial size is round and has good fluidity. It can mix with other resin. |
Application | Make molding rod, tube, plate, suitable for automatic extrusion. | Make molding rod, tube, plate, can use as engineering plastic additive. |
Packing, Storage & Transportation
(1) Packed with sealed PVC bag,load in Water content proof paper barrel. The net weight is (25 ± 0.1)kg per barrel.
(2) Not classified as hazardous for transport. During transportation and storage, avoidheavy shaking, and prevent from heating.
(3) It should stock in clean, cooland dry warehouse, prevent from agglomeration and contamination.
