FEP Aqueous Dispersion
- Model
- FT-D-1/2
Review
Description
FEP Aqueous Dispersion
FEP Dispersion can be applied to process glass fibers fabric by dipping and roasting, corrosive and adhesive resistance coatings by sprayingand continuity film of non-pinhole by molding. And it’ also used for metal non-stick coating.
Items | FT-D-1 | FT-D-2 |
Appearance | Milky or yellowish even dispersion | |
Solid content (% wt) | 50±2 | 50±2 |
Surfactant concentration (% wt) | 5~7 | 5~7 |
PH Value | 8~10 | 8~10 |
Melt Flow Rate(g/10min) | 2.0~5.0 | 5.1~8.0 |
Packing,storage & transportation:
It is packed in plastic drums with net weight of 25kg per drum. The environmental temperature for transportation and storage ranges from 5℃ to 30℃, and it should be kept from coldness and sunshine directly, available for 3 months. The container should beshocked slightly every month or the stored should be agitated above twice so asto avoid any possible precipitation. The processing temperature should be below 400 ℃ to avoid releasing toxic gases.
